A Wedge Wire Screen is a specialized screening and filtration component manufactured by welding V-shaped profile wires to support rods. This construction creates a rigid screening surface with continuous, precisely controlled openings between the profile wires.

Wedge Wire Screens are used in a wide range of industrial applications, including:

• Water and wastewater treatment
• Petrochemical and chemical processing
• Oil and gas applications
• Food and beverage processing
• Mineral processing
• Mining and extraction
• Process filtration and separation
• Sand control and solids separation
• Industrial screening applications

Depending on the design, material, profile geometry, slot opening, support configuration, and operating conditions, Wedge Wire Screens can provide:

• High mechanical strength
• Precise and uniform slot openings
• High open area
• Effective solids retention and separation
• Good resistance to clogging in appropriately designed applications
• Good resistance to wear
• Corrosion resistance appropriate to the selected material and operating environment
• Long service life when properly designed, installed, operated, and maintained

The performance and service life of a Wedge Wire Screen depend on the specific application and design parameters. Therefore, material selection, slot size, profile geometry, support arrangement, mechanical loading, process conditions, and installation requirements should be evaluated for each project.

Euroslot Pars can manufacture Wedge Wire Screens in accordance with agreed technical requirements, drawings, specifications, and applicable project documentation.

Yes.

Euroslot Pars provides engineering and manufacturing services for customized Reactor Internals, including components such as:

• Center Pipes
• Scallops
• Catalyst Support Grids
• Screens
• Support structures
• Internal distribution and collection components
• Other project-specific reactor internal components

Depending on the project scope, design activities may be performed based on customer-provided drawings, process-licensor requirements, approved datasheets, technical specifications, process data, or other project documentation.

Relevant design inputs may include:

• Flow rate
• Operating pressure
• Operating temperature
• Pressure drop requirements
• Catalyst characteristics
• Catalyst loading requirements
• Mechanical loading
• Material requirements
• Corrosion conditions
• Process conditions
• Applicable codes and standards
• Project specifications
• Process-licensor requirements

Where the process design or process guarantee is provided by the Client, EPC Contractor, engineering company, or Process Licensor, Euroslot Pars' responsibility is limited to the engineering and manufacturing scope expressly assigned to and accepted by ESP.

Unless expressly agreed otherwise in writing, Euroslot Pars does not assume responsibility for the underlying process design, process guarantee, overall reactor performance, catalyst performance, or operating results of the plant.

Final design responsibility and the applicable engineering scope shall be determined by the project-specific contractual documentation.

Euroslot Pars manufactures industrial components using a broad range of metallic materials selected according to the application, design requirements, operating conditions, project specifications, and material availability.

Commonly used materials include:

Carbon and Low-Alloy Steels

Depending on the application and applicable specifications, carbon steels and low-alloy steels may be used for structural and process components.

Stainless Steels

Common stainless-steel grades include:

• SS 304 / 304L
• SS 316 / 316L
• SS 321

Duplex and Super Duplex Stainless Steels

For applications requiring higher mechanical strength and/or enhanced corrosion resistance, Euroslot Pars can manufacture components using Duplex and Super Duplex stainless steels, subject to project requirements and material availability.

Examples include:

• UNS S31803
• Other applicable Duplex and Super Duplex grades

Nickel-Based and Special Alloys

For demanding applications, special alloys may be considered, including:

• Monel
• Inconel
• Incoloy
• Other nickel-based or corrosion-resistant alloys

Material selection is not based solely on the material name or grade. It depends on the complete application and the requirements applicable to the specific component.

Relevant factors may include:

• Operating temperature
• Operating pressure
• Process fluid and chemical composition
• Corrosion resistance
• Mechanical strength
• Wear conditions
• Fatigue considerations
• Fabrication requirements
• Welding requirements
• Applicable codes and standards
• Project specifications
• Process-licensor requirements
• Availability and procurement conditions

Other special alloys and materials may be supplied or processed upon request, subject to technical review, commercial agreement, material availability, and applicable procurement requirements.

Final material selection shall be based on the approved project documentation and shall not be considered confirmed solely on the basis of general information provided on this website.

Yes.

Euroslot Pars provides on-site installation supervision and, where expressly included in the project scope, installation execution services for a range of process equipment internals and screening and filtration equipment.

Our site services may be provided at:

• Petrochemical plants
• Refineries
• Chemical plants
• Oil and gas facilities
• Industrial processing plants
• Other industrial facilities

Depending on the agreed project scope, our personnel may supervise or perform installation activities in accordance with approved drawings, technical specifications, project requirements, applicable procedures, and site HSE requirements.

Our site services may include:

• Installation of Tower Internals
• Installation of trays
• Installation of distributors
• Installation of collectors
• Installation of demisters and mist eliminators
• Installation of support grids
• Installation of Drum and Vessel Internals
• Installation of inlet devices
• Installation of screens
• Installation of Reactor Internals
• Installation of Center Pipes
• Installation of Scallops
• Installation of Catalyst Support Grids
• Component fit-up
• Alignment and positioning
• Dimensional inspection
• Installation inspection
• Technical supervision
• Installation troubleshooting
• Technical assistance during commissioning
• Support during final inspection

The exact scope of site services, responsibilities, required personnel, equipment, duration, mobilization requirements, and commercial conditions shall be defined in the applicable project contract or written agreement.

Unless expressly included in Euroslot Pars' contractual scope, the Client remains responsible for site preparation, access, permits, lifting equipment, cranes, scaffolding, utilities, local labor, site facilities, HSE requirements, and other Client-side responsibilities.

Yes.

Euroslot Pars manufactures a wide range of customized internals and components for:

• Towers
• Reactors
• Drums
• Pressure vessels
• Process vessels
• Filtration systems
• Separation equipment
• Other industrial process equipment

Our manufacturing capabilities may include:

• Tower Internals
• Reactor Internals
• Drum and Vessel Internals
• Catalyst Support Systems
• Distributors
• Collectors
• Trays
• Demister Supports
• Mist Eliminator Supports
• Screens
• Support Grids
• Center Pipes
• Scallops
• Internal support structures
• Customized screening and filtration components
• Other engineered internal components

We can manufacture components based on:

• Customer-approved drawings
• Customer specifications
• Datasheets
• Material specifications
• Fabrication drawings
• Inspection and Test Plans (ITPs)
• Quality requirements
• Project specifications
• Applicable codes and standards
• Process-licensor requirements

Where included in the agreed scope, our engineering team can review customer documentation for manufacturability, fabrication requirements, material considerations, dimensional requirements, and other relevant manufacturing aspects.

However, manufacturing in accordance with a Client's drawing or specification does not, by itself, constitute acceptance by Euroslot Pars of responsibility for the original design, process design, process performance, equipment performance, or suitability of the Client's design for its intended process application.

Unless expressly agreed otherwise in writing, the Client, EPC Contractor, engineering company, or Process Licensor remains responsible for the adequacy and suitability of the design information provided to Euroslot Pars.

Yes.

Euroslot Pars can manufacture products based on customer-provided drawings, specifications, datasheets, approved material requirements, fabrication requirements, and project documentation, subject to technical review and acceptance of the applicable scope.

Before manufacturing, ESP may review the submitted documentation for issues that could affect manufacturing, such as:

• Dimensional consistency
• Material requirements
• Fabrication feasibility
• Welding requirements
• Tolerances
• Accessibility
• Inspection requirements
• Manufacturing sequence
• Applicable project specifications

Any such review is limited to the scope expressly agreed with the Client.

Unless ESP has expressly accepted design responsibility in writing, manufacturing to a Client-provided drawing does not transfer design responsibility to Euroslot Pars.

The Client remains responsible for the technical adequacy, completeness, accuracy, and suitability of Client-provided drawings and specifications.

Where ESP identifies a potential technical discrepancy, ESP may request clarification or written approval before proceeding.

Yes.

Euroslot Pars can work within project environments involving:

• Process Licensors
• EPC Contractors
• Engineering Consultants
• Plant Owners
• Operators
• Procurement Contractors
• Inspection Agencies
• Other authorized project stakeholders

Depending on the contractual scope, ESP may coordinate technical documentation, drawings, material requirements, manufacturing requirements, inspection activities, and other project deliverables with the relevant parties.

However, technical coordination with a Process Licensor, EPC Contractor, Client, or other third party does not by itself transfer design responsibility, process responsibility, or contractual responsibility between the parties.

Each party remains responsible for the obligations expressly assigned to it under the applicable project documentation.

The information required depends on the product and project scope.

For an accurate technical and commercial evaluation, customers may be requested to provide, where applicable:

• Equipment drawings
• General arrangement drawings
• Fabrication drawings
• Datasheets
• Process data
• Operating pressure
• Operating temperature
• Flow rate
• Process fluid information
• Material specifications
• Required slot opening
• Screen dimensions
• Loading requirements
• Applicable codes and standards
• Inspection requirements
• Quality requirements
• Quantity
• Delivery location
• Required delivery date
• Installation requirements
• Project specifications
• Process-licensor documentation

The completeness and accuracy of the information provided by the Client may directly affect the accuracy of the technical evaluation, quotation, delivery schedule, and final product configuration.

Where essential information is unavailable, ESP may provide a budgetary or preliminary quotation subject to subsequent technical confirmation.

A quotation shall become contractually binding only to the extent expressly accepted by Euroslot Pars in accordance with the applicable commercial documentation.

Yes, where material selection assistance is included within the agreed engineering scope.

Our technical team can evaluate material requirements based on information such as:

• Process environment
• Temperature
• Pressure
• Corrosive conditions
• Mechanical loading
• Wear conditions
• Fabrication requirements
• Welding requirements
• Applicable standards
• Project specifications
• Process-licensor requirements

Material recommendations provided by ESP are based on the information available to ESP at the time of evaluation.

Unless ESP has expressly assumed complete engineering responsibility under a written contract, the Client remains responsible for confirming that the selected material is suitable for the complete process application and operating environment.

Changes to process conditions or information supplied after material selection may require a new technical evaluation.

Euroslot Pars performs quality-control and inspection activities according to the applicable project requirements and agreed Quality Plan or Inspection and Test Plan (ITP).

Depending on the project scope, quality activities may include:

• Incoming material inspection
• Material identification and traceability
• Dimensional inspection
• Visual inspection
• Welding inspection
• Non-Destructive Testing (NDT), where specified
• Welding procedure and welder qualification requirements
• Material certificates
• Inspection records
• Manufacturing inspection
• Final inspection
• Packing inspection
• Documentation review

The exact inspection and testing requirements are determined by the applicable Contract, approved ITP, project specifications, drawings, applicable codes, and other agreed technical documents.

Any inspection, testing, certification, or documentation requirement outside the agreed scope may be subject to additional commercial and schedule implications.

Euroslot Pars provides engineered products and technical services for industrial applications, including:

• Oil and Gas
• Petrochemical
• Refining
• Chemical Processing
• Fertilizer
• Water and Wastewater
• Separation and Filtration
• Mining and Mineral Processing
• Other industrial process applications

The suitability of a specific product or service depends on the actual application, operating conditions, technical requirements, and approved project documentation.

Yes.

Euroslot Pars has manufacturing capabilities for customized industrial components where the required design, materials, manufacturing processes, equipment, inspection requirements, and commercial conditions can be technically and commercially accommodated.

Customized manufacturing may involve:

• Special dimensions
• Special materials
• Customized profiles
• Specific slot openings
• Complex support arrangements
• Special welding requirements
• Special inspection requirements
• Project-specific tolerances
• Special surface treatment or finishing
• Customer-specific documentation

Each customized product is subject to technical review and commercial acceptance.

Acceptance of a request for quotation does not constitute acceptance of the order or confirmation of manufacturing feasibility.

Manufacturing lead time depends on the specific product and project requirements.

Factors that may affect lead time include:

• Product complexity
• Quantity
• Material availability
• Special alloy procurement
• Engineering requirements
• Drawing approval
• Client approvals
• Inspection requirements
• Third-party inspection
• Testing requirements
• Documentation requirements
• Packaging requirements
• Delivery location
• Transportation conditions
• Site requirements
• Changes requested by the Client

The applicable delivery schedule will be stated in the relevant quotation or Contract.

Any estimated lead time provided before final technical and commercial confirmation is indicative only and shall not constitute a guaranteed delivery date unless expressly stated otherwise in the applicable Contract.

To request a quotation, customers should provide the available technical and commercial information relevant to the requested product or service.

For engineered products, providing drawings, datasheets, specifications, operating conditions, material requirements, quantities, and delivery requirements at the initial stage can help ESP perform a more accurate technical and commercial evaluation.

Our team may request additional information where necessary before issuing a final quotation.

Technical support may be provided depending on the agreed project scope.

Depending on the applicable Contract, technical support may include:

• Technical clarification
• Installation guidance
• Troubleshooting
• Inspection support
• Commissioning assistance
• Documentation support
• Warranty-related technical evaluation

The availability, duration, location, response requirements, and commercial conditions of post-delivery support are subject to the applicable Contract or written agreement.

Technical assistance does not, by itself, expand the Company's contractual warranty or create additional performance obligations.

Selection depends on the complete operating and mechanical requirements of the application.

Important parameters may include:

• Required slot opening
• Particle size distribution
• Flow rate
• Pressure
• Temperature
• Process fluid
• Solids loading
• Required open area
• Screen geometry
• Mechanical loading
• Corrosion environment
• Wear conditions
• Cleaning method
• Installation configuration
• Required service life
• Applicable project specifications

Euroslot Pars can evaluate the information provided by the Client and recommend or manufacture a suitable configuration within the agreed engineering scope.

Final suitability depends on the actual application and the completeness and accuracy of the information provided by the Client.

Such services may be available depending on the equipment, condition, technical requirements, and commercial scope.

Before accepting repair, replacement, or refurbishment work, ESP may require:

• Equipment identification
• Drawings
• Photographs
• Inspection reports
• Operating history
• Failure information
• Material information
• Dimensional information
• Site conditions
• Required turnaround time

Any repair or refurbishment recommendation is subject to technical inspection and evaluation.

No repair, replacement, or refurbishment scope shall be considered confirmed until formally accepted by Euroslot Pars in writing.

Warranty claims are handled according to the warranty terms of the applicable Contract.

Unless otherwise expressly agreed in writing, warranty coverage applies only to defects attributable to Euroslot Pars' manufacturing workmanship or supplied materials and occurring within the agreed design and operating conditions.

The warranty does not automatically cover failures resulting from:

• Incorrect installation
• Improper operation
• Operation outside specified conditions
• Unauthorized modification
• Mechanical damage
• Abnormal loading
• Improper storage
• Improper transportation after transfer of risk
• Chemical attack or corrosion beyond specified material limits
• Fouling or contamination
• Normal wear and tear
• Third-party equipment
• Client-supplied materials or information
• Conditions outside the agreed design basis

The warranty period and applicable remedies are determined by the applicable Contract.

Unless otherwise expressly agreed in writing, the warranty period commences from Delivery.

Yes.

Subject to personnel availability, site conditions, safety requirements, and contractual agreement, ESP can provide technical personnel for installation supervision or execution during shutdown, turnaround, maintenance, or replacement activities.

Because turnaround projects are often schedule-critical, the Client is responsible for ensuring that the Site is ready, accessible, safe, and properly equipped before mobilization.

Unless expressly included in the contract, delays caused by site readiness, permits, access restrictions, lifting equipment, scaffolding, other contractors, equipment availability, or Client-side activities may affect the schedule and may result in additional costs.

For technical and commercial inquiries, customers may contact Euroslot Pars through the Company's official communication channels.

Please provide as much relevant technical information as possible, particularly for engineered or customized products.

For project inquiries, including Reactor Internals, Wedge Wire Screens, Separation Internals, Filtration Systems, Site Installation, and customized industrial components, our team can review the available information and determine the appropriate technical and commercial scope.